Before installing the new filter, apply a small amount of fresh oil to the gasket on the top of the filter. Ensure the engine is cool and position the vehicle securely on level ground.
How to Change Oil at Home DIY: Step-by-Step Filter and Oil Replacement
Refer to your owner’s manual for the exact capacity and viscosity rating, such as 5W-30 or 10W-40. Removing the Old Oil Filter With the bulk of the oil drained, attention turns to the oil filter, which traps debris and particles circulating through the engine.
Screw the new filter onto the engine by hand, tightening it securely—usually about 3/4 turn past hand tight—without overtightening, which can make future removal difficult. Place a funnel into the opening and begin pouring in the recommended quantity and type of new oil.
How to Change Oil at Home DIY: Removing the Old Filter and Installing the New One
This step is critical for personal safety and prevents the vehicle from rolling during the procedure. Using the socket wrench, carefully loosen the plug by turning it counterclockwise.
More About How to change your own oil
Looking at How to change your own oil from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on How to change your own oil can make the topic easier to follow by connecting earlier points with a few simple takeaways.
