Place a funnel into the opening and begin pouring in the recommended quantity and type of new oil. Let it run for about 30 seconds, then turn it off and wait a few minutes for the oil to settle.
How to Use DIY Oil Change Ramp Stands Safely
Once loose, remove the plug by hand, allowing the oil to flow out completely. While the oil drains, take a moment to inspect the drain plug washer.
Rags, a disposable container for used oil, and a shop vacuum for any spills. Position the drain pan beneath the filter to catch residual oil and drips.
How to Safely Use DIY Oil Change Ramp Stands and Jack Stands
After adding the majority of the oil, replace the filler cap and start the engine. Proper preparation prevents messy mistakes and keeps the entire process efficient and safe.
More About How to change your own oil
Looking at How to change your own oil from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on How to change your own oil can make the topic easier to follow by connecting earlier points with a few simple takeaways.
