Use an oil filter wrench to loosen the old filter, being prepared for some oil spillage. Once loosened, remove it by hand and allow the oil to drain completely before reinstalling the plug securely.
How to Dispose of Old Oil and Filters Safely
You will need the correct type and quantity of oil specified in your owner’s manual, a new oil filter, a socket wrench set, an oil filter wrench, a drain pan, funnel, jack and jack stands or ramps, and disposable gloves. Recheck the dipstick to confirm the oil level is correct and look underneath the vehicle for any signs of leaks from the drain plug or filter.
Final Steps and Disposal Start the engine and let it run for a few minutes, then turn it off and wait a few moments for the new oil to settle back into the oil pan. Refer to your owner’s manual for the exact capacity to avoid overfilling, which can increase engine pressure and cause damage.
Proper Disposal of Used Oil and Filters After Your Oil Change
Neglecting this routine service can lead to increased wear, reduced fuel efficiency, and even costly repairs down the road. Preparing the Vehicle for an Oil Change Proper preparation is just as important as the oil change itself.
More About How to change oil in car
Looking at How to change oil in car from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on How to change oil in car can make the topic easier to follow by connecting earlier points with a few simple takeaways.
