You will need the correct type and quantity of oil specified in your owner’s manual, a new oil filter, a socket wrench set, an oil filter wrench, a drain pan, funnel, jack and jack stands or ramps, and disposable gloves. Screw the new filter onto the engine by hand, tightening it securely—typically about three-quarters of a turn past hand tight—without over-tightening, which can make future removal difficult.
How to Check Oil Level After an Oil Change
Final Steps and Disposal Start the engine and let it run for a few minutes, then turn it off and wait a few moments for the new oil to settle back into the oil pan. Draining the Old Oil Locate the oil drain plug underneath the engine, place the drain pan beneath it, and carefully loosen the plug using a socket wrench.
Replacing the Oil Filter After the oil has fully drained, locate the oil filter, usually positioned near the engine. Pouring New Oil and Checking the Level With the drain plug reinstalled and the new filter in place, position the funnel into the oil fill opening and pour in the recommended type of oil gradually.
Check Oil Level After Change Car
Refer to your owner’s manual for the exact capacity to avoid overfilling, which can increase engine pressure and cause damage. Step Description 1 Gather tools and new oil filter 2 Lift and secure the vehicle safely.
More About How to change oil in car
Looking at How to change oil in car from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on How to change oil in car can make the topic easier to follow by connecting earlier points with a few simple takeaways.
