After the refill, start the engine and allow it to run for several minutes, then turn it off and wait a few minutes for the oil to settle in the pan. Gather all necessary tools beforehand, including a socket set, oil filter wrench, drain pan, funnel, and personal protective equipment like gloves and eye protection.
Prepare New Filter Before Install for Optimal Performance
Consult the owner’s manual for the exact capacity and viscosity rating, as using the incorrect specification can lead to performance issues. Using the correct socket size, carefully loosen the drain plug by turning it counter-clockwise, then finish the removal by hand to control the initial flow.
Remember that filters are installed with significant torque to ensure a tight seal, so applying steady, firm pressure is necessary for removal. Post-Change Procedures With the new filter and drain plug installed, position the funnel in the oil filler port and pour in the recommended quantity and grade of new oil.
Prepare New Filter Before Install
Raising a vehicle on jack stands without proper jack points is extremely dangerous, so drive onto ramps if you lack a suitable lift. An oil filter wrench is typically required to loosen the cylindrical housing.
More About How to change oil and filter
Looking at How to change oil and filter from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on How to change oil and filter can make the topic easier to follow by connecting earlier points with a few simple takeaways.
