Enhances the tactile feel of the wood without creating a plastic-like sheen. Consequently, the finish cures harder and resists penetration by water and oils far better than its non-polymerized counterpart.
Polymerized Tung Oil Brush Spray Application Techniques
A second coat is usually applied once the first feels dry to the touch, building up the desired level of protection and sheen. Polyurethane creates a hard, plastic-like barrier that is virtually impenetrable, whereas this oil provides a breathable finish that will show wear more gracefully.
Sanding to a fine grit, typically between 220 and 320, ensures that the oil penetrates evenly and creates a smooth base. After allowing the solvent to evaporate, the raw oil remains to be absorbed fully.
Polymerized Tung Oil Brush Spray Application Techniques
The natural grain of the wood remains highly visible, as the finish does not yellow significantly over time, making it ideal for light-colored hardwoods and projects where the integrity of the figure is paramount. This creates a denser film that is less prone to sticking to fingers during handling and is significantly more resistant to scuffs and marks.
More About Polymerized tung oil
Looking at Polymerized tung oil from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on Polymerized tung oil can make the topic easier to follow by connecting earlier points with a few simple takeaways.
