Using the appropriate oil filter wrench, loosen the filter by turning it counter-clockwise. Before screwing it on, place a small amount of new oil on your finger and rub it onto the rubber gasket.
Oil Filter Removal Mistakes Avoid
Start by parking the car on a level surface and engaging the parking brake. Hand-tighten the filter until it is snug, generally following the guideline of "hand tight plus a quarter turn.
Empty any residual oil from the old filter into the container before discarding it properly. Once drained, replace the drain plug and pour the new oil through the engine's fill port.
Oil Filter Removal Mistakes Avoid
Lift the front of the car with a jack, placing jack stands under designated support points, or drive the vehicle onto ramps if using that method. Most modern filters require a fresh coat of oil on the gasket.
More About Oil filter removal
Looking at Oil filter removal from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on Oil filter removal can make the topic easier to follow by connecting earlier points with a few simple takeaways.
