At the moment the filter begins to rotate, stop and unscrew it the rest of the way by hand to prevent tearing the gasket and leaving metal shavings in the engine. If the filter does not rotate after the first half-turn, do not apply brute force immediately.
Oil Filter Removal After Oil Change
Failure to do so results in a poor seal that will leak and potentially cause the new filter to fall off while driving. Place the filter wrench over the canister and ensure a secure grip on the ridges.
Final Checks and Disposal After the filter is secured, lower the vehicle and start the engine. Over-tightening by a previous technician, exposure to road salt, or simply the heat cycling of old oil can cause a metal canister to weld itself to the drain plug.
Removing an Oil Filter After the Oil Change
This "snug but not tight" approach allows the gasket to seal correctly without the metal canister deforming, which is the actual cause of most post-installation leaks. Installing the Replacement With the engine surface clean, take your new filter and apply a fresh layer of oil to the gasket.
More About How to unscrew an oil filter
Looking at How to unscrew an oil filter from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on How to unscrew an oil filter can make the topic easier to follow by connecting earlier points with a few simple takeaways.
