Pouring New Oil After the old oil has fully drained and the old filter has been removed, you can begin installing the new components. Replace the drain plug securely, tightening it to the manufacturer’s specifications—over-tightening can strip the threads, while under-tightening can lead to leaks.
Carefully Install New Oil Filter and Components
Position the new oil filter onto the engine and tighten it hand-tight plus a quarter turn. Vehicle Elevation Once the vehicle is secure, you must elevate it safely to access the drain plug underneath.
The goal is to position the oil drain pan directly under the drain plug so that the old oil flows cleanly into the container without spilling onto the ground. Start the engine and let it run for a few minutes, then carefully check underneath the vehicle for any signs of dripping or leakage.
Install New Oil Filter and Drain Plug Securely
Post-Change Procedures With the new oil and filter installed, you must verify that everything is functioning correctly. Draining the Old Oil With the vehicle properly lifted, locate the oil drain plug, which is a large bolt at the bottom of the oil pan.
More About Oil change steps
Looking at Oil change steps from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on Oil change steps can make the topic easier to follow by connecting earlier points with a few simple takeaways.
