Slide the drain pan beneath the oil drain plug and loosen it carefully, allowing the oil to flow out completely. Only then can you locate the oil filter, which is typically positioned near the engine block at the front or side of the vehicle.
How to Properly Remove and Replace Your Oil Filter
Remember that filters are tightened at the factory to ensure a seal, so you will need to apply significant torque to break it loose. Be prepared for a sudden release and a stream of oil that may still be dripping from the housing.
Once installed, start the engine and let it run for a minute, then check underneath for any signs of dripping before driving away. Draining Old Oil Before removing the filter, you must drain the old oil to prevent a scalding mess.
How to Correctly Replace Your Oil Filter After Draining Old Oil
Removing the Filter With the oil drained, position the oil filter wrench over the canister. Turn the wrench counterclockwise; initially, it will feel very tight, but it will eventually give way.
More About How to take off oil filter
Looking at How to take off oil filter from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on How to take off oil filter can make the topic easier to follow by connecting earlier points with a few simple takeaways.
