Preparation and Safety Before getting your hands dirty, proper preparation is crucial for a safe and efficient oil change. Before installing the new filter, you must apply a small amount of fresh oil to the gasket on the top of the filter.
How to Replace Oil Car Drain: Step-by-Step Drain and Filter Replacement
Adding New Oil With the old oil drained and the new filter in place, you can now add fresh oil to the engine. Once loose, you can usually unsight it the rest of the way by hand, but be prepared for oil to start flowing immediately.
Over-tightening a filter can make it extremely difficult to remove during the next change and may damage the mounting surface. Installation Steps Screw the new filter onto the engine by hand, tightening it securely.
How to Replace Oil Car Drain: Step-by-Step Filter Removal and Installation
Consult your owner’s manual to determine the recommended viscosity grade, such as 5W-30 or 10W-40, and whether the manufacturer specifies synthetic, conventional, or a blend. Draining the Old Oil With the vehicle securely lifted and positioned on jack stands, you are ready to drain the old oil.
More About How to replace oil in car
Looking at How to replace oil in car from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on How to replace oil in car can make the topic easier to follow by connecting earlier points with a few simple takeaways.
