Wipe away any excess oil and inspect the plug and washer for wear before reinstalling. Once the filter is in place, locate the oil filler cap under the hood and remove it, then pour in the new oil gradually.
How To Hand Tighten Oil Filter Correctly
Once the vehicle is secure, place the drain pan beneath the oil pan, making sure it is positioned directly under the plug to catch all draining oil. Screw the filter onto the engine by hand, tightening it snugly, generally about three-quarters of a turn past hand tight, though it is best to refer to the manufacturer’s guidelines.
Allow the oil to drain completely into the pan, which can take several minutes, and resist the urge to rush this step. Removing the Old Filter With the oil drained, locate the oil filter, typically mounted near the engine.
How to Hand Tighten an Oil Filter Correctly
Position the drain pan beneath the filter, as residual oil will spill out when it is removed. While the filter is off, inspect the mounting surface for debris or old gasket material, and clean it thoroughly to ensure a proper seal for the new filter.
More About How do i do an oil change
Looking at How do i do an oil change from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on How do i do an oil change can make the topic easier to follow by connecting earlier points with a few simple takeaways.
