You will require the correct oil filter, the manufacturer-specified type and quantity of motor oil, a new crush washer for the drain plug, a sturdy floor jack, jack stands, wheel chocks, a ratchet set, an oil filter wrench, a drain pan, a funnel, nitrile gloves, and rags for cleanup. Screw the new filter onto the engine by hand, tightening it snugly—typically about three-quarters of a turn past hand-tight—following the rotation direction indicated on the filter housing.
How to Do Oil Change Easily
Once drained, tighten the plug securely to the manufacturer’s torque specification to avoid stripping the threads or causing a leak that could lead to low oil pressure while driving. Loosen the filter with the oil filter wrench, carefully twisting it off by hand, and be prepared for a quick release of oil.
Before installing the new filter, apply a thin layer of fresh oil to the gasket on the top of the filter by hand. Replacing the Oil Filter The oil filter captures smaller particles that the oil pick-up screen misses, and a neglected filter can negate the benefits of fresh oil.
How to Do Oil Change Easily
Preparation and Safety Before you even open the hood, proper preparation separates a quick, clean job from a frustrating, messy ordeal. An overtightened filter can make future removal difficult and risk damaging the mounting surface, while an under-tightened filter can leak and cause a rapid loss of oil pressure.
More About How to do an oil change
Looking at How to do an oil change from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on How to do an oil change can make the topic easier to follow by connecting earlier points with a few simple takeaways.
