Hand-tighten the plug securely, then use the wrench to tighten it an additional quarter turn, being cautious not to apply excessive force that could strip the threads. Pouring New Oil and Checking Levels Slide the funnel into the oil fill opening at the top of the engine and pour in the majority of the new oil gradually.
Complete DIY Oil Change Checklist: Essential Steps and Tips
Monitoring your driving habits and environmental conditions helps determine whether you require changes every 3,000, 5,000, or 10,000 miles. Wipe away any spills, dispose of the old oil and filter responsibly at a recycling center, and inspect the underside of the vehicle for drips before driving away.
Securing the Filter Screw the new filter onto the engine by hand, turning it clockwise until it contacts the mounting surface. Verification and Cleanup Turn off the engine and wait a few minutes for the oil to settle in the pan.
Complete DIY Oil Change Checklist: Tools and Steps
An excessively tight filter can be difficult to remove during the next change and may damage the mounting threads. Use the dipstick to check the level, adding small amounts if necessary until the marker indicates the proper range.
More About Do it yourself oil change
Looking at Do it yourself oil change from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on Do it yourself oil change can make the topic easier to follow by connecting earlier points with a few simple takeaways.
