Allow the oil to drain completely until the flow slows to a drip, which usually takes a few minutes. Before removing the plug, double-check that the pan is aligned with the stream of oil to avoid splashes on the underside of the vehicle.
Understanding Oil Viscosity Grades for Your Vehicle
New oil filter and the correct engine oil, as specified in the owner’s manual Socket wrench set, oil filter wrench, and an appropriately sized socket for the drain plug Funnel, drain pan, and disposable gloves to protect your hands from hot oil and grime Jack and jack stands or ramps, ensuring they are rated for the weight of your vehicle Shop rag, flashlight, and a sturdy pair of safety glasses Position the vehicle on a level surface, engage the parking brake, and turn the engine off. Screw the new filter onto the engine by hand, tightening it snugly, usually about three-quarters of a turn past hand-tight, but always refer to the manufacturer’s guidance on the filter packaging.
Before you begin, it is important to confirm the correct oil type, capacity, and filter for your specific make and model. The owner’s manual provides the exact viscosity, such as 5W-30 or 5W-20, along with the recommended change interval and the total oil capacity of the engine.
Understanding Oil Viscosity Grades for Your Vehicle
Once drained, securely tighten the drain plug by hand first, then snug it with the wrench, being careful not to overtighten, as this can strip the threads or damage the plug. Using a socket wrench, carefully loosen the drain plug by turning it counterclockwise, then finish by hand to control its removal.
More About How to change oil in a car
Looking at How to change oil in a car from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on How to change oil in a car can make the topic easier to follow by connecting earlier points with a few simple takeaways.
