Using your socket wrench, carefully loosen the plug by turning it counter-clockwise. Before installing the new filter, apply a small amount of fresh oil to the rubber gasket on the top of the filter.
Check Oil Level After Changing Your Oil Correctly
If using a jack, you must lift the car, place the jack stands under the designated lift points, and then lower the car onto the stands before crawling underneath. New oil filter (Ensure it matches your make and model).
It becomes contaminated with combustion byproducts, loses its viscosity, and if left unchanged, turns into sludge that can clog passages and lead to catastrophic engine failure. Screw the new filter onto the engine by hand, tightening it snugly—usually about 3/4 turn past hand tight.
Check Oil Level After Changing the Oil in Your Car
Once loose, remove it by hand, allowing the oil to flow out completely. Safety and Vehicle Preparation Safety is non-negotiable when working under a vehicle.
More About How do you change oil in a car
Looking at How do you change oil in a car from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on How do you change oil in a car can make the topic easier to follow by connecting earlier points with a few simple takeaways.
