Understanding the 2017 Ford Escape 1.5 oil capacity is essential for any owner who wants to maintain their vehicle’s performance and longevity. The 1.5-liter EcoBoost engine, a popular choice for this model year, requires a specific amount of lubricant to function correctly. Providing the right amount of oil ensures proper engine cooling, reduces friction, and helps prevent premature wear.
2017 Ford Escape 1.5 Engine Specifications
The 2017 model year marked a significant update for the Escape, introducing a more efficient 1.5-liter, three-cylinder turbocharged engine. This unit was designed to deliver a balance of fuel economy and power, making it an attractive option for drivers seeking efficiency without sacrificing capability. Knowing the specifics of this engine is the first step in determining the correct maintenance procedures.
Determining the Correct Oil Capacity
The oil capacity for a 2017 Ford Escape with the 1.5-liter engine is typically listed in the owner’s manual. However, if you are looking for a quick reference, the general consensus from certified technicians and parts databases indicates a required volume of approximately 4.4 quarts (4.2 liters) for a standard oil change. This figure assumes the use of the recommended 5W-20 viscosity oil.
Importance of Using the Right Oil
Simply knowing the 2017 Ford Escape 1.5 oil capacity is not enough; using the correct type of oil is equally critical. Ford specifies that the engine requires 5W-20 motor oil. This viscosity grade is specifically engineered to provide adequate protection during cold starts and to ensure optimal performance in warmer temperatures. Using a thicker oil can put unnecessary stress on the turbocharger and other critical components.
Always refer to the information on the oil cap for the most accurate viscosity rating.
Synthetic oils are generally recommended for their superior performance and longevity.
Using the wrong oil can lead to reduced fuel economy and potential engine damage.
Step-by-Step Oil Change Procedure
When performing an oil change on your 2017 Escape, it is vital to follow the proper sequence to ensure you achieve the correct 2017 Ford Escape 1.5 oil capacity replacement. First, warm up the engine for a few minutes. This warms the oil, making it flow better and drain more completely. After lifting the vehicle and securing it on jack stands, locate the drain plug and remove it carefully to let the old oil empty into a catch pan.
Torque Specifications and Filter Replacement
Once the oil has fully drained, replace the drain plug securely. It is crucial to tighten the plug to the manufacturer’s torque specification to avoid stripping the threads. Next, replace the oil filter. Before installing the new filter, apply a small amount of fresh oil to the gasket. This ensures a proper seal and prevents dry starts when the engine is turned over.
After installing the new filter, slowly pour the new oil into the fill port. You will need roughly 4.4 quarts, but it is best to add the oil incrementally. Check the dipstick frequently during this process to avoid overfilling. Overfilling the crankcase can lead to increased pressure within the valve cover, which may cause oil leaks or seal failure.
Common Mistakes to Avoid
Even experienced DIY enthusiasts can make errors when maintaining the 2017 Ford Escape 1.5 oil capacity. One of the most frequent mistakes is overfilling the engine. Because the 1.5-liter engine has a relatively small sump, adding too much oil can cause significant problems. Symptoms of overfilling include oil leaks, excessive smoke from the exhaust, and a burning oil smell.
