The 2013 model year, part of the second generation of the redesigned Explorer, has specific requirements that differ from earlier models, making it essential to verify the exact type and capacity for your specific trim. The 2013 Ford Explorer generally requires approximately 5 to 6 quarts of oil for a standard filter replacement.
How to Reset the 2013 Explorer Oil Life Monitor
Always replace the oil filter with a new one during the change, as the old filter will be saturated with contaminants that can mix with the fresh oil if reused. Additionally, many modern Fords utilize a specific Life Oil system; if your vehicle is equipped with this, ensure the oil is compatible with the system to accurately monitor drain intervals without triggering warning lights.
For the 2013 Explorer, you should look for oil that meets the API SN classification or the subsequent API SP standard if available. Ford specifically formulated this recommendation to balance fuel efficiency with protection for the EcoBoost and standard engine variants found in this year.
How to Reset the 2013 Explorer Oil Life Monitor
Regular intervals for oil changes, typically every 5,000 to 7,500 miles for severe service, will ensure the engine remains clean and operates at peak efficiency. Using a heavier oil, such as 10W-30, might have been acceptable in older models but can cause the advanced engine components of the 2013 Explorer to work harder.
More About 2013 Ford explorer oil type
Looking at 2013 Ford explorer oil type from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on 2013 Ford explorer oil type can make the topic easier to follow by connecting earlier points with a few simple takeaways.
